[04.09.2013] VeEX Receives Frost & Sullivan's 2012 Product Differentiation Excellence Award.
Fremont, Calif., April 9, 2013 – VeEX Inc., a global leader in Telecom and CATV test solutions, has been named the recipient of Frost & Sullivan’s 2012 Product Differentiation Excellence Award for Mobile Backhaul Test Equipment. This prestigious award acknowledges VeEX's exemplary accomplishments and outstanding performance in network test applications.
[04.01.2013] VeEX® introduces '1PPS Clock Phase Analysis' for Mobile Backhaul tester.
Fremont, Calif., April 1, 2013 – VeEX, a global leader in Telecom and CATV test solutions, today announced the introduction of the new Clock Phase Analysis for its TX130M+ test set.
[07.18.2012] VeEX® introduces industry's smallest multiservice, multitasking analyzer for 40/100G networks.
Fremont, Calif., July 18, 2012 – VeEX, a global leader in Telecom and CATV test solutions, today announced the introduction of the new UX400 Universal Expert test platform. Weighing less than 15 kg, the UX400 is the smallest multiservice transport test solution available – A fully configured instrument can test a multitude of client interfaces from T1/E1 all the way up to the latest high speed 40G and 100G network data speeds with battery autonomy and backup at all rates.
[02.16.2012] VeEX successfully demonstrates interoperability of Mobile Backhaul test solution.
Fremont, Calif., February 16, 2012 – VeEX Inc., a global leader in Telecom and CATV test solutions, recently participated in the multi-vendor Interoperability Showcase organized by the European Advanced Networking Test Center (EANTC). The test event focused on the latest innovations in IPv6 Migration, Mobile Backhaul Transport and Synchronization, MPLS-TP Fault Management, and Performance Monitoring.
[01.31.2012] VeEX™ adds mini OTDR to complement Transmission and Ethernet Tester portfolio.
Fremont, Calif., January 31, 2012 – VeEX Inc., a global leader in Telecom and CATV test solutions, today announced the introduction of the FX300 mini OTDR series, a product optimized for today’s optical fiber networks. Featuring optical performance that rivals larger traditional and more expensive OTDRs, the unit offers impressive measurement capabilities to troubleshoot and verify optical fibers used in FTTx, metro ethernet, and next generation mobile backhaul applications. High resolution data sampling (cm), small dead zones (<1m) and high dynamic range (up to 37dB) ensure precise and comprehensive assessment of FTTx, exchange/central office, intra-building and long haul fiber deployments.
[11.07.2011] VeEX™ introduces Y.1564 Service Activation Methodology test suite
Fremont, Calif., November 7, 2011 – VeEX Inc., a global leader in Telecom and CATV test solutions, announces the release of the V-SAM test suite for its VePAL V300 and VePAL V100+ series Ethernet products. The V-SAM feature is based on the recently ratified ITU-T Y.1564 standard which revolutionizes Ethernet test methodology by introducing an efficient and comprehensive test suite suited for Carrier Ethernet and Mobile Backhaul environments.
[11.07.2011] VeEX Inc. adds Ethernet OAM testing
Fremont, Calif., November 7th, 2011 – VeEX Inc., a global leader in Telecom and CATV test solutions, announces the release of the Ethernet OAM (Operations, Administration, and Maintenance) feature in its VePAL 300 and VePAL 100+ Transport and Ethernet test set portfolio. The Ethernet OAM feature supports industry standard OAM protocols IEEE 802.3ah, IEEE 802.1ag, and ITU-T Y.1731, required to provision and troubleshoot Carrier Ethernet and Mobile Backhaul network deployments.
[11.04.2011] VeEX™ expands industry’s leading 1GE tester portfolio.
Fremont, Calif., November 4, 2011 – VeEX, a global leader in Telecom and CATV test solutions, today announced the introduction of the VePAL MX100e+, a new low cost version of its’ widely deployed MX100+ handheld Ethernet product family. The MX100e+ supports 10/100/1000Base-T copper and 100Base-FX, 1000Base-X optical interfaces.
[08.22.2011] VeEX™ intros the world’s smallest full featured DOCSIS 3.0 Analyzers CX150-D3+ and CX180-D3+.
Fremont, Calif., August 22, 2011 – Weighing less than 1kg (2.2lb), the new CX150-D3+ and CX180-D3+ from VeEX Incorporated are the industry’s smallest and most portable handheld testers to verify and provision 8x4 channel bonding used in high bandwidth DOCSIS 3.0 CATV networks. An integrated, dual band DOCSIS 3.0/EuroDOCSIS 3.0 modem, supporting data rates of up to 120Mbps Upstream and 400Mbps (Annex A) or 320Mbps (Annex B) Downstream, enables MSOs, Service Providers and Installation Contractors to evaluate High Speed Internet, and related multimedia service offerings to residential, mobile backhaul and SMB customers.
[05.10.2011] VeEX™ intros multifunctional tester for Synchronized Packet and Legacy networks.
Fremont, Calif., May 10, 2011 – VeEX, a global leader in Telecom and CATV test solutions, today announced the introduction of the VePAL TX130M+, a purpose built tester to validate next generation packet synchronization technologies implemented in Mobile backhaul and Carrier Ethernet networks. The unit is the industry’s first handheld solution capable of emulating both Master and Slave clocks according to ITU-T G.8261 SyncE and IEEE1588v2 standards.
[01.19.2011] VeEX™ adds IPv6 testing to Ethernet test platforms.
Santa Clara, Calif., Jan. 19, 2011 – VeEX announces the incorporation of IPv6 test capabilities in its TX and MX Transport and Ethernet test set portfolio.
[12.12.2010] We are pleased to announce that VeEx Technology Ltd. has been established to serve the growing customer demands in Taiwan. Please contact VeEX Technology at +886-2-27992218 or mail:
[11.23.2010] VeEX™ adds overclocked ITU-T OTN test rates to TX300.
Santa Clara, Calif., Nov. 23, 2010 – VeEX has enhanced the OTN test suite on the TX300 by adding Ethernet-over-Optical Transport Network (EoOTN) test capability for 10 Gbps networks. Overclocked OTU2 rates (OTU1e and OTU2e) as specified in ITU-T recommendations G.Sup43 are able to transport 10 Gigabit Ethernet LAN PHY from IP/Ethernet switches and routers at full line rate (10.3 Gbps).
[11.16.2010] VeEX™ sweeps CATV networks leveraging IP communications
Santa Clara, Calif., Nov. 16, 2010 – VeEX has added Return Path sweep capability to its’ CX350, CX380 and CX180R CATV products. Both CX350 and CX380 field portable analyzers equipped with Upstream Generator are able to initiate a sweep test from a field test point (Hub, Node) and synchronize with a companion CX380 portable or CX180R rackmount analyzer located in the Cable Headend.
[11.09.2010] VeEX™ implements WAN Ping testing into legacy Telco and next generation Mobile backhaul testers.
Santa Clara, Calif., Nov. 9, 2010 – VeEX adds two powerful WAN IP Ping test modes to the TX130+ test platform. Using the High-Level Data Link Control (HDLC) protocol to encapsulate and frame IP traffic or datagrams, both PPP and Ethernet payload type mappings are supported for a range of test interfaces. Ping testing using the ICMP message is a very useful tool to test IP connectivity across legacy DTE/DCE (RS232, RS422, V35) datacom interfaces, PDH and T-Carrier and other serial point-point pseudowire type networks.
[11.02.2010] VeEX™ announces miniature media converters
Santa Clara, Calif., Nov. 2, 2010 -- VeEX announces two highly compact media converter accessories for the MX/TX Ethernet product series. The MC100 is a rate-switching 10/100 UTP copper to 100BASE-FX fiber media converter providing cost-effective connectivity from Ethernet testers to 100 Mbit/s legacy fiber based networks. The MC1000 is a miniature 1000BASE-T UTP copper to 1000BASE-X fiber Gigabit Ethernet media converter supporting connectivity from Gigabit switches to Ethernet test equipment, and other devices such as computers.
[01.08.2010] VeEX™ intros multifunctional tester for mature and emerging networks.
Santa Clara, Calif., Jan. 8, 2010 - VeEX has added the TX130+ test platform to its range of handheld access network diagnostic tools. As telecom networks globally undergo a migration from legacy to emerging technologies, many customers have been left stranded without a single, modern and multifunctional test tool to install, verify and troubleshoot both old and new networks - until now.
[12.17.2009] VeEX receives 2009 Global Frost & Sullivan Award for Price Performance Value of the Year.
MOUNTAIN VIEW, Calif. - December 17, 2009 - Based on its recent analysis of the World Gigabit Ethernet test equipment market, Frost & Sullivan recognizes VeEX Inc. with the 2009 Global Frost & Sullivan Award for Price Performance Value of the Year, for its ability to provide superior value to customers. In addition to focusing on providing value-added services such as free online training and certification, 24/7 customer service and standard 3-year warranty, and meeting changing customer needs, the company is uniquely committed to offer a higher price/performance value to customers than its competitors.
[11.03.2009] VeEX announces powerful SLA validation test feature.
Santa Clara, Calif., Nov. 3, 2009 -- VeEX announces a powerful Service Level Agreement (SLA) validation test feature for its VePAL V300 series Ethernet products. The "RFC2544 Advanced SLA Mode" feature combines the powerful multiservice throughput test capabilities found on these products with the RFC2544 industry test suite for SLA verification.
[10.28.2009] VeEX™ introduces the next generation DOCSIS 3.0 CaTV analyzer.
Santa Clara, Calif., Oct. 28, 2009 - VeEX introduces the industry's first all-in-one installation and maintenance tester for next generation DOCSIS 3.0 CATV networks. Configured with a high performance dual band signal level meter by default, a range of options including a CableLabs certified dual band DOCSIS 3.0 Cable modem, a 1GHz spectrum analyzer, a forward and return path Digital QAM analyzer, a long range TDR and an Upstream QAM Signal Generator can be added and tailored for specific CATV workforce teams.
[02.11.2009] 2009 Global xDSL Test Equipment Entrepreneurial Company of the Year Award.
VeEX Inc. has been named recipient of this presitigious award by Frost & Sullivan, a recognized global growth consulting company. According to Frost & Sullivan, this award is presented to the test equipment company that has been able "nurture the development of a key technology, and allowed it to grow in a market despite the inherent odds confronting small companies."
[02.11.2009] VePAL MX120/MX300 and TX300 4 Gbps Fibre Channel Test Suite
VeEX introduces an optional 4 Gbps Fibre Channel test suite to the MX120/300 and TX300 platforms providing comprehensive test performance capabilities for high bandwidth SAN deployments. The optional Fibre Channel test suite offers full line rate traffic generation and analysis, bit error rate testing (BERT), round trip delay measurements, buffer-to-buffer credit configuration, and flow control (RRDY) statistics.
[12.29.2008] VePAL TX300 Next Generation 10Gigabit Network Analyzer.
VeEX introduces the industry's smallest universal 10 Gigabit Next Generation Network analyzer. This highly versatile 2.5kg (6 lbs) unit supports SONET/SDH applications at test rates from DS1/E to OC-192/STM-64 including Metro Ethernet applications at 10GE, dual 1GE and dual 10/100/1000Base-T in a single instrument, eliminating the need to carry cumbersome modules.
[10.02.2008] MLX300 Intelligent 10GE loopback device.
VeEX introduces the industry's first intelligent loopback device for 10Gigabit Ethernet remote test applications.
[09.15.2008] VX1000 VoIP server software.
VeEX announces a low cost VoIP server software package that runs on any Windows compatible PC platform. The VX1000 software accepts multiple VoIP test calls from VeEX test sets to measure bi-directional MOS scores and R-factors.
[09.05.2008] MX300 portable 10GE Metro/Ethernet tester.
VeEX introduces the industry's smallest, hand-held, 10Gigabit Ethernet tester. Featuring a super bright 7" color TFT / touch panel display, three hour battery operation and weighing in at 2.5kg / 5.5lbs, this versatile instrument supports 10GigE LAN/WAN rates including dual 1GigE optical and 10/100/1000Base-T copper interfaces.
[06.06.2008] TX150 adds SONET test capability.
VeEX adds Synchronous Optical Network (SONET) test capability to the TX150/e, the industry's smallest and feature rich tester for the installation and maintenance of PDH/SDH transmission networks.
Lost my password/username
Hot & New Products
©2013 VeEX Inc. All rights reserved |
Job @ VeEX Inc.