RF/CaTV Testing



PRODUCTS

AT2500-3G

Designed for digital cable TV, OFDM signal analysis for D3.1, Satellite and over-the-air digital TV signal analysis and measurements, VeEX’s new AT2500-3G is the industry’s most complete 3 GHz advanced spectrum analyzer and multi-standards test solution.

CX310

The new CX310 is equipped with a true DOCSIS 3.1 / 32x8 Cable Modem supporting OFDM measurements as well as VeTest throughput capabilities. Comprehensive SLM features include Single Channel, Full System Scan, Tilt and Ingress Scan. These key capabilities are the basis of the Home Installation Process (HIP) Auto test, enabling Home Certification conformance testing.

CX380s-D3.1

The CX380s-D3.1 is a next generation test solution designed for analog and digital cable TV networks with key maintenance tools including enhanced Spectrum Analysis with 1.8 GHz range, DOCSIS 3.1 OFDM Analysis, Digital Channel, Sweep, MPEG Analysis, and 10 Gigabit Ethernet test capabilities.

CX350s-D3.1

The CX350s-D3.1 is a portable, all-in-one test solution for legacy analog and digital Cable TV networks, supporting SLM, DOCSIS 3.0/3.1, Ethernet, and T1 test capabilities.

CaLan 3010H+

The CaLan 3010H+ Sweep System is designed for prequalification, installation, and maintenance of DOCSIS 3.1 networks. The unit consists of a high performance, 1.8 GHz Transmitter and a low noise, 204 MHz Receiver, capable of sweeping the entire Forward and Return path respectively.

MTTplus

Building on the legacy of the legendary MTT, the MTTplus platform provides a compact, powerful and cost-effective modular test toolkit for today's wide range of evolving test needs. The modern and flexible MTTplus test platform offers a growing range of test modules covering legacy and modern Access (copper and fiber), FTTx, Metro, Carrier Ethernet and Transport technologies.

MTTplus-900 | WiFi Air Expert Module

The MTTplus-900 WiFi Air Expert Module is the most complete and compact tool for WiFi networks discovery, survey, optimization, performance testing and troubleshooting.

VS-500

The affordable VS-500 digital fiber inspection microscope features a single-finger focusing knob, brightness control and a digital sensor with detectable resolution to 0.5 μm, providing excellent image viewing and analysis. A variety of tips for industry standard connector types is available.

RXT-1200

The RXT is the industry’s most flexible, compact, and future-proof hand-held test solution for core, metro, access and fiber optics applications. The forward-looking RXT-1200™ platform addresses the challenges of communication service providers to increase efficiency and productivity.

RXT-1200 | DWDM OTDR Module

The RXT-4111 test module for the VeEX® RXT-1200 platform features a tunable DWDM OTDR for testing optical Mux/Demux to verify channel routing and end to end connectivity. Multi-service DWDM networks can be verified with a single test platform ensuring maximum test productivity.

RXT-1200 | CWDM OTDR Module

The RXT-4112 test module for the VeEX® RXT-1200 platform features a range of Optical test functions including CWDM OTDR, OPM, Light Source and VFL. Multi-protocol networks utilizing CWDM technology can easily be verified with a single test platform ensuring maximum test productivity.

RXT-1200 | OSA Modules

The RXT-4500/4510 OSA modules are Optical Spectrum/Channel Analyzers for CWDM and DWDM networks. Using superior micro-optic design and MEMS tuning technology, the modules measure key optical parameters such as wavelength, channel power, and OSNR.

RXT-1200 | Cable Expert Module

Designed for the MSO Super-Tech, the RXT-8000 Module provides an abundance of test features addressing RF, DOCSIS, MPEG, and Ethernet applications. Additionally, the RXT-1200 platform provides access to a 100G Carrier Ethernet Test Module, as well as Optical Test tools including an OTDR,OSA, and Fiber Inspection scope.

CX150-D3+ (red)

The compact, handheld CX150-D3+ is comprised of a feature rich SLM with an embedded DOCSIS 3.0 Cable Modem supporting full 8x4 Channel Bonding.

CX100+

A next generation CATV installer meter to characterize and measure Analog and Digital video signals.

CX120+

Equipped with the same base feature set as the CX100+, the CX120+ boasts the industry’s first Upstream Signal Generator with FEC capabilities as an option.

CX40

This palm-size, lightweight TDR is an ideal tool for coaxial and twisted pair cable fault location.

CX10/CX10+

The CX10/CX10+ is a handheld Cable Length Meter that employs Fast-edge Step Time Domain Reflectometer (TDR) technology to measure the length of power and telecom cables.

CM3000/CM3800

The CM3000 and CM3800 analyze Upstream and Downstream network performance for business and bundled services. Both instruments validate the effectiveness of DOCSIS 3.0 services.

DI-1000

Fiber Optics Connector Inspection Scope. The ergonomically designed DI-1000 connects directly to VeEX test sets through its USB 2.0 port. The DI-1000 features an easy single-finger focusing knob, comprehensive list of tips and digital image sensor and optics with detectable resolution to 0.5 μm.